ΠΟΡΤΕΣ Αρχεία - Ellicon https://www.ellicon.gr/product-category/autokineto/monotika/portes/ Ellicon Mon, 02 Feb 2026 08:43:01 +0000 el hourly 1 https://wordpress.org/?v=6.9.4 https://www.ellicon.gr/wp-content/uploads/2025/06/cropped-Image8-32x32.jpg ΠΟΡΤΕΣ Αρχεία - Ellicon https://www.ellicon.gr/product-category/autokineto/monotika/portes/ 32 32 Comfort Mat Aerospace GALAXY (7 mm) https://www.ellicon.gr/product/comfort-mat-galaxy-7-mm/ Thu, 02 Oct 2025 09:31:36 +0000 https://www.ellicon.gr/?post_type=product&p=10967 Τιμή Πακέτου About Comfortmat Aerospace technology The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound. The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum. Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling. In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials. Comfort Mat AEROSPACE GALAXY 7 mm is a multi layer vibro-acoustic material that combines effective anti-vibration properties with advanced sound insulation capabilities. It combines a modern vibro-acoustic mixture with foamed granules, a 2 mm thick sound insulation membrane and 100 micron aluminum foil with a matte finnish. Thanks to this combination, Galaxy provides a significant reduction in vibrations and noise transmission in a single layer. Galaxy achieves an acoustic loss factor (MLF) of 0.56 and also brings a significant improvement in sound insulation. Thanks to its design, it simultaneously reduces resonances and contributes to increasing the rigidity of large body surfaces. This makes Galaxy ideal for applications on the floor and rear wheel arches. It is also suitable for doors, where a significant improvement in acoustic comfort is required in a single layer. With adhesion strength of around 13 N/cm, it remains firm even in demanding conditions. The surface weight of 6.90 kg/m² represents a saving of 30 to 40% compared to traditional two-layer applications, which is essential especially in soundproofing electric and sports cars. Layers: – 100 micron foil – 2 mm thick heavy membrane –  5mm mastic with foamed granules – adhesive glue Thickness – 7 mm, Sheet size – 480 x 320 mm, Foil thickness: 100 microns. Sheet weight – 1,06 kg , Weight – 6,90 kg/m2, Adhesion – 13 N / cm, Used as a single layer, 10 pcs in one pack. Place to use: Doors Floor Wheels arches EAN 4640107333715

Το άρθρο Comfort Mat Aerospace GALAXY (7 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου


About Comfortmat Aerospace technology
The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound.

The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum.

Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling.

In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials.

Comfort Mat AEROSPACE GALAXY 7 mm is a multi layer vibro-acoustic material that combines effective anti-vibration properties with advanced sound insulation capabilities. It combines a modern vibro-acoustic mixture with foamed granules, a 2 mm thick sound insulation membrane and 100 micron aluminum foil with a matte finnish. Thanks to this combination, Galaxy provides a significant reduction in vibrations and noise transmission in a single layer. Galaxy achieves an acoustic loss factor (MLF) of 0.56 and also brings a significant improvement in sound insulation. Thanks to its design, it simultaneously reduces resonances and contributes to increasing the rigidity of large body surfaces. This makes Galaxy ideal for applications on the floor and rear wheel arches. It is also suitable for doors, where a significant improvement in acoustic comfort is required in a single layer. With adhesion strength of around 13 N/cm, it remains firm even in demanding conditions. The surface weight of 6.90 kg/m² represents a saving of 30 to 40% compared to traditional two-layer applications, which is essential especially in soundproofing electric and sports cars.

Layers:
– 100 micron foil
– 2 mm thick heavy membrane
–  5mm mastic with foamed granules
– adhesive glue

Thickness – 7 mm,
Sheet size – 480 x 320 mm,
Foil thickness: 100 microns.
Sheet weight – 1,06 kg ,
Weight – 6,90 kg/m2,
Adhesion – 13 N / cm,
Used as a single layer,
10 pcs in one pack.

Place to use:
Doors
Floor
Wheels arches

EAN 4640107333715

Το άρθρο Comfort Mat Aerospace GALAXY (7 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Aerospace PULSAR (5 mm) https://www.ellicon.gr/product/comfort-mat-aerospace-pulsar-5-mm/ Thu, 02 Oct 2025 08:55:13 +0000 https://www.ellicon.gr/?post_type=product&p=10959 Τιμή Πακέτου About Comfortmat Aerospace technology The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound. The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum. Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling. In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials. Comfort Mat AEROSPACE PULSAR 5 mm is a universal vibroacoustic material from the new Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination in a single layer significantly simplifies application and brings high effect with minimal added weight. Pulsar is 5 mm thick and achieves an acoustic loss factor (MLF) of 0.45, which corresponds to top anti-vibration materials. The use of an advanced vibroacoustic layer with foamed granules brings high efficiency without the need for massive body loading, making it an ideal solution for places with medium to high vibration and noise loads – typically doors, roof, trunk floor. Pulsar also significantly reduces sheet metal resonances and, thanks to its high adhesive strength of around 15 N/cm, remains firmly adhered even in demanding conditions. The surface weight of 4 kg/m² makes it an great choice for electric and sport cars or any other application where low weight is critical. Layers: – 100 micron foil – 5 mm mastic with foamed granules – adhesive glue Thickness – 5 mm, Sheet size – 500 x 320 mm, Foil thickness: 100 microns. Sheet weight – 0,65 kg , Weight – 4,06 kg/m2, Adhesion – 15 N / cm, Used as a single layer, 15 pcs in one pack.   Place to use: Doors Roof Hood Trunk lid Trunk Floor under rear seats EAN 4640107333494

Το άρθρο Comfort Mat Aerospace PULSAR (5 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου


About Comfortmat Aerospace technology
The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound.

The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum.

Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling.

In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials.

Comfort Mat AEROSPACE PULSAR 5 mm is a universal vibroacoustic material from the new Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination in a single layer significantly simplifies application and brings high effect with minimal added weight. Pulsar is 5 mm thick and achieves an acoustic loss factor (MLF) of 0.45, which corresponds to top anti-vibration materials. The use of an advanced vibroacoustic layer with foamed granules brings high efficiency without the need for massive body loading, making it an ideal solution for places with medium to high vibration and noise loads – typically doors, roof, trunk floor. Pulsar also significantly reduces sheet metal resonances and, thanks to its high adhesive strength of around 15 N/cm, remains firmly adhered even in demanding conditions.
The surface weight of 4 kg/m² makes it an great choice for electric and sport cars or any other application where low weight is critical.

Layers:
– 100 micron foil
– 5 mm mastic with foamed granules
– adhesive glue

Thickness – 5 mm,
Sheet size – 500 x 320 mm,
Foil thickness: 100 microns.
Sheet weight – 0,65 kg ,
Weight – 4,06 kg/m2,
Adhesion – 15 N / cm,
Used as a single layer,
15 pcs in one pack.

 

Place to use:
Doors
Roof
Hood
Trunk lid
Trunk
Floor under rear seats

EAN 4640107333494

Το άρθρο Comfort Mat Aerospace PULSAR (5 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Aerospace VOLT (2,5 mm) https://www.ellicon.gr/product/comfort-mat-aerospace-volt-25-mm/ Thu, 02 Oct 2025 08:24:23 +0000 https://www.ellicon.gr/?post_type=product&p=10955 Τιμή Πακέτου About Comfortmat Aerospace technology The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound. The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum. Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling. In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials. Comfort Mat AEROSPACE VOLT 2,5 mm is the lightest and thinnest material from Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination makes Volt an effective solution for soundproofing vehicles where added weight is critical – typically in electric vehicles and sports cars. With a thickness of only 2.5 mm and a surface weight of around 2.28 kg/m², Volt is ideal for the roof, doors, hood or trunk lid. Layers: – 100 micron foil – 2,5 mm mastic with foamed granules – adhesive glue Thickness – 2.5 mm, Sheet size – 500 x 700 mm, Foil thickness: 100 microns. Sheet weight – 0,8 kg , Weight – 2,28 kg/m2, Adhesion – 11 N / cm, Water proof – YES. Used as a single layer. 10 pcs in one pack. Place to use: Doors Roof Hood Trunk lid EAN 4640107333739

Το άρθρο Comfort Mat Aerospace VOLT (2,5 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου


About Comfortmat Aerospace technology
The Aerospace series materials combine anti-vibration and sound insulation properties in a single application layer. Unlike traditional damping layers, which often focus only on anti vibration and require multi-stage application, Aerospace uses an advanced sandwich structure that effectively absorbs vibrations and significantly isolates the passage of sound.

The technology is based on a vibroacoustic layer with foamed granules – light elastic particles with a bulk density of approximately 0.02 g/cm³ evenly dispersed in a polymer mastic with a density of 1.25 g/cm³. The resulting mixture has a final bulk density of 0.58 g/cm³, which allows for a high level of damping without a significant increase in weight. The combination of two different acoustic environments – a heavy mastic and light, flexible granules – increases the ability to absorb and lower vibrations across a wide frequency spectrum.

Aerospace technology has a great power-to-weight ratio, which is a key feature for electric and sports cars where every extra kg is important. The materials have an acoustic loss factor (MLF) of up to 0.62  (Aerospace Zenith) in the range of -10 to +40 °C, which is a value at or above the level of the most effective anti-vibration materials on the market. The high adhesive strength in the range of 11 to 16 N/cm (depending on the type of material) guarantees perfect adhesion even on vertical or curved surfaces without the risk of peeling.

In addition to acoustic parameters, Aerospace materials also have a significant impact on the rigidity of the body. Bending strength tests show that, for example, the Galaxy and Zenith models increase the resistance to sheet metal deformation even more than conventional anti-vibration materials. Low water absorption (below 0.7%) and resistance in a wide temperature range (from extreme heat to deep frost) are also key features of Aerospace materials.

Comfort Mat AEROSPACE VOLT 2,5 mm is the lightest and thinnest material from Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination makes Volt an effective solution for soundproofing vehicles where added weight is critical – typically in electric vehicles and sports cars.
With a thickness of only 2.5 mm and a surface weight of around 2.28 kg/m², Volt is ideal for the roof, doors, hood or trunk lid.

Layers:
– 100 micron foil
– 2,5 mm mastic with foamed granules
– adhesive glue

Thickness – 2.5 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 100 microns.
Sheet weight – 0,8 kg ,
Weight – 2,28 kg/m2,
Adhesion – 11 N / cm,
Water proof – YES.
Used as a single layer.
10 pcs in one pack.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107333739

Το άρθρο Comfort Mat Aerospace VOLT (2,5 mm) εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Door Kit https://www.ellicon.gr/product/comfort-mat-door-kit/ Fri, 10 Nov 2023 04:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-door-kit Comfort Mat Door Kit

Το άρθρο Comfort Mat Door Kit εμφανίστηκε πρώτα στο Ellicon.

]]> DOOR KIT

 

This KIT is made for 2 doors.

KIT consists of:
– VESPA 50×35 cm – 8 pcs,
– INTEGRA 50×35 cm – 4 pcs,
– SOFT WAVE 70×50 cm – 2 pcs.

Size of the box: 53,5x37x9,5 cm.
Weight: 8 kg.

Advantages of our DOOR KIT, compairing to the competitors:
– First set with 2,5mm deadening mat. All competitors have thinner mats.
– First set with multilayer isolator. All competitors have single layer isolator.
– First set with WAVE type soft mat. All competitors have flat type soft mat.
– Price. We did our best to make the best door kit with competitive price.

 

Το άρθρο Comfort Mat Door Kit εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Tsunami 18mm https://www.ellicon.gr/product/comfort-mat-tsunami-18mm/ Tue, 07 Nov 2023 04:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-tsunami-18mm [embed]https://youtu.be/Dlr0_ijvYlc[/embed]

Comfort Mat Tsunami 18mm

Το άρθρο Comfort Mat Tsunami 18mm εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου

 

Comfort Mat TSUNAMI (2nd layer) is an updated product in Comfort Mat Expert range of materials.It is an acoustic foam AcoFoam II, made on the basis of a mixture of synthetic rubbers, 18 mm thick with a strong sealant type adhesive.

The material is designed for installation on the external “panel” of the door, for professional high-quality acoustic preparation of the door volume. Eliminates negative and acoustic phenomena: reflection, standing waves, superposition of waves one on top of another (“ECHO” effect). It greatly improves the sound quality of acoustic speakers, and is also an excellent noise isolator.

 

Thickness – 18 mm,
Sheet size – 350 x 500 mm,
Adhesion – 5-8 N / cm,
Water proof material – YES;
Water proof glue – YES.
Used as a 2nd layer.
4 pcs in one pack.

Place to use:
Doors/Wheels arches

EAN 4640107332558

Το άρθρο Comfort Mat Tsunami 18mm εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Bronze 2mm https://www.ellicon.gr/product/comfort-mat-bronze-2mm/ Mon, 06 Nov 2023 05:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-bronze-2mm Comfort Mat Bronze 2mm

Το άρθρο Comfort Mat Bronze 2mm εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου

Comfort Mat BRONZE 2 mm is a budget mastic vibration deadening mat for zones with light or medium vibration loads.
Universal vibration deadening material with thickness of 2 mm has good adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil.
The use of a modified elastomer in the composition of the mastic gives the material a good mechanical loss factor, good adhesion, resistance to environment and a wide temperature range of work.
BRONZE series mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.

Thickness – 2 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 60 microns.
Mechanical loss factor – 0.26,
Sheet weight – 1.10 kg,
Weight – 3.14 kg/m2,
Adhesion – 6 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107332688

 

Το άρθρο Comfort Mat Bronze 2mm εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Vespa 2,5 mm https://www.ellicon.gr/product/comfort-mat-vespa-25-mm/ Mon, 06 Nov 2023 04:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-vespa-25-mm [embed]https://youtu.be/2eomVXDJMPM[/embed]

Comfort Mat Vespa 2,5 mm

Το άρθρο Comfort Mat Vespa 2,5 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου

 

Comfort Mat VESPA 2,5 mm is a classic mastic vibration deadening mat for zones with light or medium vibration loads.
Universal vibration deadening material with thickness of 2.5 mm has increased adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil.
The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work.
VESPA mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.

Thickness – 2.5 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 100 microns.
Mechanical loss factor – 0.36,
Sheet weight – 1.23 kg ,
Weight – 3.51 kg/m2,
Adhesion – 14 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107332275

Το άρθρο Comfort Mat Vespa 2,5 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Cobra 2,3 mm https://www.ellicon.gr/product/comfort-mat-cobra-23-mm/ Mon, 06 Nov 2023 04:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-cobra-23-mm [embed]https://youtu.be/bxU6RINNhl4[/embed]

Comfort Mat Cobra 2,3 mm

Το άρθρο Comfort Mat Cobra 2,3 mm εμφανίστηκε πρώτα στο Ellicon.

]]>

Τιμή Πακέτου

Comfort Mat COBRA is a 2,3mm vibration deadening mat with foil thickness of 120 microns.
It has an increased adhesion to metal, mastic is made from a mixture of special polymers.
The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work.
COBRA mats are not afraid of water, they have sealant and anti-corrosion features and dont need heating during installation.

Thickness – 2,3 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 120 microns.
Mechanical loss factor – 0.40,
Sheet weight – 0,95 kg,
Weight – 2,71 kg/m2,
Adhesion – 14 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107332435

 

Το άρθρο Comfort Mat Cobra 2,3 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Viper 3.0 mm https://www.ellicon.gr/product/comfort-mat-viper-3-0-mm/ Mon, 06 Nov 2023 04:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-viper-3-0-mm [embed]https://youtu.be/bxU6RINNhl4[/embed]

Comfort Mat Viper 3.0 mm

Το άρθρο Comfort Mat Viper 3.0 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου

 

Comfort Mat VIPER is a 3mm vibration deadening mat with foil thickness of 120 microns.
It has an increased adhesion to metal, mastic is made from a mixture of special polymers.
The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work.
VIPER mats are not afraid of water, they have sealant and anti-corrosion features and dont need heating during installation.

Thickness – 3 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 120 microns.
Mechanical loss factor – 0.49,
Sheet weight – 1,28 kg,
Weight – 3,65 kg/m2,
Adhesion – 14 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches
Doors
Roof
Hood
Trunk lid

EAN 4640107332442

 

Το άρθρο Comfort Mat Viper 3.0 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Comfort Mat Spider 3,5 mm https://www.ellicon.gr/product/comfort-mat-spider-35-mm/ Sun, 05 Nov 2023 05:00:00 +0000 https://demo2.vpgraphics.eu/?product=comfort-mat-spider-35-mm [embed]https://youtu.be/2eomVXDJMPM[/embed]

Comfort Mat Spider 3,5 mm

Το άρθρο Comfort Mat Spider 3,5 mm εμφανίστηκε πρώτα στο Ellicon.

]]> Τιμή Πακέτου

 

Comfort Mat SPIDER 3,5 mm is a classic mastic vibration deadening mat for zones with medium or high vibration loads.
Universal vibration deadening material with thickness of 3,5 mm has increased adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil.
The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work.
SPIDER mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.

Thickness – 3,5 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 100 microns.
Mechanical loss factor – 0.45,
Sheet weight – 1.85 kg,
Weight – 5,29 kg/m2,
Adhesion – 14 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches
Doors

EAN 4640107332282

Το άρθρο Comfort Mat Spider 3,5 mm εμφανίστηκε πρώτα στο Ellicon.

]]>